Figure 203. Removing the riser 3/4 assembly
2. Remove the riser cage tray.
Figure 204. Removing the riser cage tray
a. Remove the screws that secure the riser cage tray.
b.
Slide the riser cage tray backwards and then lift it out the chassis.
After you finish
1. Remove the PCIe adapter from the riser assembly. See
“Remove a rear PCIe adapter” on page 236.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Chapter 5. Hardware replacement procedures 235
To Next Page
Loading...
