• “CFF 8i/16i RAID/HBA adapter” on page 318
• “Riser 5 + OCP interposer cards + 8i/16i RAID/HBA adapter” on page 320
• “Riser 3/4/5 + 8i/16i RAID/HBA adapter + Retimer card” on page 321
8i/16i RAID/HBA adapter
The following shows the cable connections for the 8 x 2.5-inch AnyBay configuration with one 8i/16i RAID/
HBA adapter.
To connect the processor interconnection cable when two processors are installed, see
“Processor
interconnection cable routing” on page 311
.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
SAS/SATA cable routing
Figure 300. SAS/SATA cable routing to 8i/16i RAID/HBA adapter
From To
1 Backplane 1: SAS 1 8i/16i adapter
• Gen 4: C0
• Gen 3: C0C1
Chapter 6. Internal cable routing 317
To Next Page
Loading...
