NVMe cable routing
Figure 301. Cable routing when two processors installed
Figure 302. Cable routing when one processor installed
From To From To
1 Backplane 1: NVMe 0-1
1 Onboard: PCIe 5
1 Backplane 1: NVMe 0-1
1 Onboard: PCIe 2
2 Backplane 1: NVMe 2-3
2 Onboard: PCIe 7
2 Backplane 1: NVMe 2-3
2 Onboard: PCIe 1
3 Backplane 1: NVMe 4-5
3 Onboard: PCIe 6
3 Backplane 1: NVMe 4-5
3 Onboard: PCIe 9
4 Backplane 1: NVMe 6-7
4 Onboard: PCIe 8
4 Backplane 1: NVMe 6-7
4 Onboard: PCIe 10, 11
CFF 8i/16i RAID/HBA adapter
The following shows the cable connections for the 8 x 2.5-inch AnyBay configuration with one CFF 8i/16i
RAID/HBA adapter.
To connect the processor interconnection cable when two processors are installed, see
“Processor
interconnection cable routing” on page 311
.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
318 ThinkSystem SR665 V3 User Guide
To Next Page
Loading...
