Lexmark MS610 Series Service Manual

Actions Yes No
Step 16
Assign the correct wireless network to the printer.
Did this fix the problem?
The problem is solved. Go to step 17.
Step 17
Are the other devices on the wireless network communicating properly?
Go to step 18. Contact the network
administrator.
Step 18
Verify that the wireless card is properly seated on the controller board.
Is the wireless card seated correctly?
Go to step 20. Go to step 19.
Step 19
Properly reseat the wireless card.
Did this fix the problem?
The problem is solved. Go to step 20.
Step 20
If there is an attached antenna, is the antenna damaged?
Go to step 22. Go to step 21.
Step 21
Replace the antenna.
Did this fix the problem?
The problem is solved. Go to step 22.
Step 22
Verify that the antenna is properly connected to the wireless card.
Is it connected correctly?
Go to step 24. Go to step 23.
Step 23
Properly connect the antenna.
Did this fix the problem?
The problem is solved. Go to step 24.
Step 24
Replace the wireless card.
Did this fix the problem?
The problem is solved. Go to step 25.
Step 25
Replace the controller board. See “Controller board removals” on
page 184.
Did this fix the problem?
The problem is solved. Contact the next level
of support.
4514-630, -635, -636
Diagnostic information
115

Lexmark MS610 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 50 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	1280 MB
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	Ethernet
Input Capacity	Up to 650 pages
Duplex Printing	Yes