Lexmark MS610 Series Service Manual

MS510
Status 1 meter average sound pressure
dBA
Declared sound power level (Bels)
Idle (Standby) Inaudible Inaudible
Quiet Mode 51 dBA 6.6 Bels
Simplex Printing 54 dBA 6.9 Bels
Sleep/Hibernate Mode Inaudible Inaudible
Measurements apply to 300 dpi, 600 dpi and 1200 dpi printing.
MS610
Status 1 meter average sound pressure
dBA
Declared sound power level (Bels)
Idle (Standby) Inaudible Inaudible
Quiet Mode 52 dBA 6.7 Bels
Simplex Printing 55 dBA 7.0 Bels
Sleep/Hibernate Mode Inaudible Inaudible
Measurements apply to 300 dpi, 600 dpi and 1200 dpi printing.
Operating environment
Environment Specification
Printer operating
Temperature 60 to 90 °F (16 to 32 °C)
Relative humidity 8 to 80%
Maximum wet bulb temperature 73 °F (23 °C)
Printer off
Temperature 50 to 110 °F (10 to 43 °C)
Relative humidity 8 to 80%
Maximum wet bulb temperature 80 °F (27 °C)
Ambient operating environment*
Temperature 60 to 90 °F (16 to 32 °C)
Relative humidity 8 to 80%
Storage and shipping (packaged
printer) with or without print
cartridge
Temperature -40 to 110 °F (-40 to 43 °C)
Altitude 10,000 ft (0 to 3,048 m)
Atmospheric pressure 74.6 kPa
Tilt 2°
*In some cases, performance specifications (such as paper OCF, EP cartridge usage) are measured at an ambient
condition.
4514-630, -635, -636
Appendix A: Printer specifications
281

Lexmark MS610 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 50 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	1280 MB
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	Ethernet
Input Capacity	Up to 650 pages
Duplex Printing	Yes