Print Quality Pages
This option is a limited version of the Print quality pages setting that appears in the Diagnostics menu. See “Print Quality
Pages” on page 125. This setting reports the values of a broad range of printer settings and tests the ability of the
printer to generate acceptable printed output.
To print the report:
1 From the Configuration menu, navigate to Print Quality Pages.
2 Depending on the printer model, press OK or touch to print the pages, or press X to exit without printing the
pages.
Printing Quality Test Pages appears on the display. Once started, the printing cannot be canceled and
no buttons are active until the printing completes.
Reports
Menu Settings Page
This report generates a list of the Configuration menu settings and the value of each setting.
To print the Menu settings page from the Configuration menu:
1 From the Configuration menu, navigate to:
Reports > Menu Settings Page
2 Depending on the printer model, press OK or touch to print the page, or press X to return to the Configuration
menu.
Event Log
This generates a printed report of the events detailed in the Print log. See “Print Log” on page 136.
To print the Event log from the Configuration menu:
1 From the Configuration menu, navigate to:
Reports > Event Log
2 Press X to return to the Configuration menu.
Panel Menus
This enables or disables the control panel menus.
Available options:
• On—Menus enabled
• Off—Menus disabled
PPDS Emulation
The value of this option determines if a printer can recognize and use the PPDS data stream.
4514-630, -635, -636
Service menus
138
To Next Page
Loading...
Need help?
General
