Error code Description Action
54 Network error Make sure the printer is properly setup on the
network.
If the problem remains:
1 Remove the wireless network option, and reset
the printer. If the problem does not reoccur,
replace the wireless network option.
2 If the problem remains, replace the controller
board.
80 Maintenance kit (MS510 and MS610 only) Replace the maintenance kit, and then reset the
Maintenance counter.
84 Imaging unit low
1 Replace the imaging unit.
2 Make sure the imaging unit smart chip contact
cable is properly connected to the controller
board.
3 Make sure the contacts are free of debris.
4 Check the contacts for damaged pins. If damaged,
replace the printer.
5 If the contacts are free of damage, contact your
next level of support.
88 Toner cartridge low
1 Make sure the toner cartridge smart chip contact
cable JARW1 is properly connected to the
controller board.
2 Make sure the contacts are free of debris.
3 Check the contacts for damaged pins. If damaged,
replace the toner cartridge smart chip contact.
4 If the contacts are free of damage, contact your
next level of support.
Toner cartridge smart chip contact service check
Action Yes No
Step 1
Check the cable JARW1 for proper connection to the controller board.
Is it properly connected?
Go to step 2. Reseat the cable.
Step 2
Check the toner cartridge smart chip contact for damaged pins.
Is it free of damage?
Replace the controller
board. See “Controller
board removals” on
page 184.
Replace the toner
cartridge smart chip
contact. See “Toner
cartridge smart chip
contact removal” on
page 188.
4514-630, -635, -636
Diagnostic information
84
To Next Page
Loading...
