Lexmark MS610 Series - Scheduled Maintenance; Maintenance Kits

Scheduled maintenance
The control panel displays an 80.xy error when it reaches 200K page counts. It is necessary to install the appropriate
maintenance kit to maintain the print quality and reliability of the printer. Reset the maintenance counter after replacing
the maintenance kit.
Maintenance kits
Part number and kit Contents
40X8439—200K Maintenance Kit (MS510dn, 100 V)*
• Fuser (100V)
• Redrive assembly
• ACM tires/hubs
• Transfer roll
• Tray separator bracket
• MPF pick roll and separator pad
40X8281—200K Maintenance Kit (MS510dn, 110 V)
• Fuser (110V)
• Redrive assembly
• ACM tires/hubs
• Transfer roll
• Tray separator bracket
• MPF pick roll and separator pad
40X78282—200K Maintenance Kit (MS510dn, 220 V)
• Fuser (220V)
• Redrive assembly
• ACM tires/hubs
• Transfer roll
• Tray separator bracket
• MPF pick roll and separator pad
40X8440—200K Maintenance Kit (MS610dn, 100 V)*
• Fuser (100V)
• Redrive assembly
• ACM tires/hubs
• Transfer roll
• Tray separator bracket
• MPF pick roll and separator pad
40X8433—200K Maintenance Kit (MS610dn, 110 V)
• Fuser (110V)
• Redrive assembly
• ACM tires/hubs
• Transfer roll
• Tray separator bracket
• MPF pick roll and separator pad
*This kit is available only in Japan.
4514-630, -635, -636
Maintenance
258