EasyManuals Logo

Lexmark MS610 Series Service Manual

Lexmark MS610 Series
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Not enough free space in flash memory for resources [52]
Try one or more of the following:
From the printer control panel, select Continue to clear the message and continue printing. For nontouchscreen
printer models, press
to confirm.
Delete fonts, macros, and other data stored in the flash memory.
Upgrade to a larger capacity flash memory card.
Note: Downloaded fonts and macros that are not previously stored in the flash memory are deleted.
Printer had to restart. Last job may be incomplete.
From the printer control panel, touch to clear the message and continue printing. For nontouchscreen printer
models, press
to confirm.
For more information, visit http://support.lexmark.com or contact customer support.
Reinstall missing or unresponsive cartridge [31.xy]
Try one or more of the following:
Check if the toner cartridge is missing. If missing, install the toner cartridge.
For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide.
If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner
cartridge.
Reinstall missing or unresponsive imaging unit [31.xy]
Try one or more of the following:
Check if the imaging unit is missing. If missing, install the imaging unit.
For information on installing the imaging unit, see the “Replacing supplies” section of the User’s Guide.
If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the imaging unit is defective. Replace the
imaging unit.
Remove paper from standard output bin
Remove the paper stack from the standard bin. The printer automatically detects paper removal and resumes printing.
If removing the paper does not clear the message, then select Continue on the printer control panel. For non-touch-
screen printer models, press
to confirm.
4514-630, -635, -636
Diagnostic information
40

Table of Contents

Other manuals for Lexmark MS610 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS610 Series and is the answer not in the manual?

Lexmark MS610 Series Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print SpeedUp to 50 ppm
Print Resolution1200 x 1200 dpi
Processor Speed800 MHz
Standard Memory256 MB
Maximum Memory1280 MB
Maximum Paper Size8.5 x 14 inches
Operating System CompatibilityWindows, Mac OS, Linux
ConnectivityEthernet
Input CapacityUp to 650 pages
Duplex PrintingYes

Related product manuals