Lexmark MS610 Series Service Manual

Insufficient memory service check
Action Yes No
Step 1
Check the memory card for proper installation.
Is it properly installed?
Go to step 2. Reseat the memory
card.
Step 2
a Print the Menu settings page:
Settings > Reports > Menu Settings Page
b POR into the Configuration menu and reset the printer’s settings to
factory default:
Configuration Menu > Factory Defaults > Restore Base
c Remove the memory card.
d Restart the printer.
Does the error remain?
Replace the controller
board. See “Controller
board removals” on
page 184.
Replace the memory
card.
4514-630, -635, -636
Diagnostic information
87

Lexmark MS610 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 50 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	1280 MB
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	Ethernet
Input Capacity	Up to 650 pages
Duplex Printing	Yes