Lexmark MS610 Series Service Manual

3 Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of the paper.
4 From the printer control panel, touch to clear the message and continue printing. For non‑touch‑screen printer
models, select Next >
> Clear the jam, press OK > .
25y.xx paper jam messages
Error code Description Action
250.06 Input sensor did not detect sheet picked from MPF.
No other sheets should be in the path.
Go to “MPF service check” on page 81.
250.10 Input sensor did not detect sheet picked from MPF.
No other sheets should be in the path.
250.13 Input sensor did not detect sheet picked from MPF.
Sheet also last page of stapled job.
250.14 Input sensor did not detect sheet picked from MPF.
Other sheets should have been flushed.
250.17 Input sensor did not detect sheet picked from MPF.
No other sheets should be in the path.
250.18 Input sensor did not detect sheet picked from
MPF. Other sheets could be in the path.
4514-630, -635, -636
Diagnostic information
80

Lexmark MS610 Series Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 50 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Standard Memory	256 MB
Maximum Memory	1280 MB
Maximum Paper Size	8.5 x 14 inches
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	Ethernet
Input Capacity	Up to 650 pages
Duplex Printing	Yes