Link Communications RLC-4 User Manual

9-3
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
074: Allow Access To a Port that Requires Preaccess
This command allows commands to be executed on the port the command is executed from until
the preaccess timer which it starts (see command 020 for more info on timers) runs out. It is
usually called automatically when you access the controller, so you don’t have to do it manually.
When executed, it temporarily allows access to the rest of the commands in the controller.
<074>
Parameters:
- 074 is the default command name.

Link Communications RLC-4 Specifications

General

Brand	Link Communications
Model	RLC-4
Category	Controller
Language	English