Link Communications RLC-4 User Manual

6-1
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
Chapter 6: CW, DTMF, and DVR Messages
This chapter deals with all of the different types of messages that can be sent from the controller:
CW, DTMF, and real voice from the digital voice recorder.
Sending of CW Messages
- CW speed and tone control
DTMF regeneration
- Regeneration parameters
Play, Record and Erase a Digital Voice Recorder message
Generate one and two tone sequences
DTMF Keypad test
The controller normally figures out which transmitters each message should go to. Responses to
commands go to the port that executed the command, ID's go to the port that needs them, and
courtesy beeps go to all of the repeaters that could hear the audio from the receiver that caused the
ID. Almost all of these defaults can be overridden by the user, if you so desire. For more
information about how the messages are routed and how you can change the default routing, see
Chapter 16 and Appendix A.

Link Communications RLC-4 Specifications

General

Brand	Link Communications
Model	RLC-4
Category	Controller
Language	English