Link Communications RLC-4 User Manual

13-12
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
121: Set Nuisance Numbers Table Slot
This command allows you to set one of the slots in the nuisance number table. For a description of
this table and how to use it, see the explanation of the dialing tables before Command 110.
<121> s Clear slot s
<121> s d..d Program Slot s
Parameters:
- 121 is the default command name.
- S is the slot number (0..9)
- D..D is the whole number to be blocked (do include the last four digits of the phone
number). The '#' digit is a wildcard that matches any digit.
122: Recall Nuisance Numbers Table Slot
This command allows you to recall the contents of one of the slots in the nuisance number table.
For a description of this table and how to use it, see the explanation of the dialing tables before
Command 110.
<122> s
Parameters:
- 122 is the default command name.
- S is the slot number (0..9)
- D..D is the whole number to be blocked (do include the last four digits of the phone
number). The '#' digit is a wildcard that matches any digit.

Link Communications RLC-4 Specifications

General

Brand	Link Communications
Model	RLC-4
Category	Controller
Language	English