Link Communications RLC-4 - 002: Disconnect One Port from Another Port

2-5
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
002: Disconnect one Port from another Port
This command allows you to disconnect one radio port from another radio port.
<002> x y
Parameters:
- 002 is the default command name
- X is the first port to disconnect
- Y is the second port to disconnect
Default:
- All port default as links
Note:
If you want to break all of the connections to a port, check out Command 061.
Example 1:
Disconnect Port 1 from Port 4
<002> 1 4 <unkey>
Response:
CW response "1 F 4"
Example 2:
Port 2 is currently a repeater port. You want to return the port to a link
<002> 2 2 <unkey>
Response:
CW response "2 F 2"