13-6
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
112: Normal Forward Dial
This is the normal autopatch up command you would make available to your users if you want an
open autopatch. It will only dial numbers that aren’t long distance (assuming you have set up the
dialing restrictions with commands 119 and 121). If you wish to dial numbers shorter than 5 digits,
longer than 11 digits, or long distance numbers, use command 113. Command 114 can be used to
hang up the patch.
<112> ss Autopatch using an autodial memory slot
<112> d..d Autopatch using user entered number
Parameters:
- 112 is the default command name.
- SS is the autodial slot number (1..2 digits)
- D..D is the phone number you want to dial
Notes:
• The longest number that can be dialed with the command is eleven digits, because that is the
longest number that can be specified in the allowed number table. If you need to dial longer
numbers, use Command 113.
To Next Page
Loading...
Need help?
General
