Link Communications RLC-4 User Manual

13-17
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
136: Set up Reverse Autopatch Ring
This command allows the user to set up the over the air ringing tone and length.
<136> Recall ring length and frequency
<136> xxx yyyy Set ring length and frequency
Parameters:
- 136 is the default command name.
- XXX is the length of the ring tone in 10ms increments (100 = 1 second)
- YYYY is the Frequency of the first ring tone
Defaults:
Ring tone length defaults to 2 Second
Ring tone frequency defaults to 1064 Hz.
Example:
To set the ring back to the default: 136 200 1064
Notes:
Do not make the length of the ring tone too long. The controller will stack up tone requests
and could still be ringing over the air after the phone has answered if the length of the tone is longer
than the delay between rings from your phone company.

Link Communications RLC-4 Specifications

General

Brand	Link Communications
Model	RLC-4
Category	Controller
Language	English