Link Communications RLC-4 - 061: Disconnect All Ports from a Radio Port

2-12
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
061: Disconnect all Ports from a Radio Port
This command allows you to disconnect all of the other radio ports from one radio port with one
command. Please note that if you execute this command for a repeater port, it will disconnect it
from itself, breaking it out of repeater mode. To make it a repeater again, you will have to use
command 000. If you only want to break some of the connections to a port, see command 002.
<061> p
Parameters:
- 061 is the default command name
- P is the port to disconnect all other ports from
Shortcut:
If you want to break all of the connections to several ports, list all of them. For example:
061 1 2 3 4 <unkey> breaks every connection in the whole crosspoint.
Example:
Disconnect all other ports from Port 4
<061> 4 <unkey>
CW Response:
"4 C"