12-10
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
(let us suppose it is exactly 20mV for this example). If the battery voltage is 3.002 volts, the
converter will round it to 3.000. If the voltage is 3.003 volts, the converter will round it to 3.005.
No matter what you do, the last digit read will always be 0 or 5. The number read back by the
controller will sound like it has 10 mV resolution, but the reading will only have 20mV resolution.
If all of this has confused you, ignore it and select 0 digits after the decimal point (or leave it alone
if you haven't changed it - 0 digits is the default).
To Next Page
Loading...
Need help?
General
