1-12
RLC-4 V1.79 Copyright © 1998 Link Communications Inc. 9/18/98
This error is similar to error macro 200 except it occurs when a listed command that is not
enabled, is called. The command name exists but the command does not exist.
Error 12 - Bad Autopatch Number
You tried to enter a number in the autopatch that is invalid or blocked.
Error 13 - General Autopatch error
There is a general autopatch error that just occurred. Refer to the command you are
executing and verify the format or the autopatch is not configured (See Command 110)
Error 14 - User requested is disabled
This error is encountered if a user that is disabled tries to log-on to the system.
Error 15 - Digital Voice Recorder (DVR) is busy
This error is encountered if the DVR is currently busy and the requested DVR function can
not be processed.
Error 16 - Macro is full
This error indicates a macro position if full. No more commands can be added to the
specific macro.
Error 17 - Reserved
Error 18 - Reserved
Error 19 - Reserved
To Next Page
Loading...