Linx 10 - Page 9

Page 4 of 88 TP1A072–3 English
Aug 2017
Linx 10 Operating Manual —
Printer user interface
Linx 10
1. Printer status bar
The printer status bar shows the current jet state of the printer (for example, “Jet Starting” or
“Printing”). The colour of the printer status bar on the Home screen (and on other printer screens,
except the Faults & Warnings notification screens) shows the jet state as shown in Figure 2.
See Figure 4 on page 6 for more information about which printer control buttons are available in each
of these printer states.
The following information icons can also be displayed on the left side of the printer status bar.
Figure 3. Printer status bar icons
A The printer cover which allows access to the printer consumables (ink and solvent cartridges,
and the service module) is open or not correctly closed. When the cover is correctly closed,
the icon is no longer displayed. See ‘Look after your printer’ on page 79 for more information
about printer consumables.
B A valid USB memory device is inserted and recognized. See ‘USB connection’ on page 74 for
more information about the printer USB connection.
C The printer Service Module requires replacement. ‘Look after your printer’ on page 79 for
more information about printer maintenance and service module replacement.
2. Faults & Warnings status button
This button displays visual information about the current state of the printer:
Jet state Printer status bar colour
Idle White
Jet Starting Light blue
Jet Running Medium blue
Printing Green
Jet Stopping Light blue
Fault Red
Jet Maintenance Dark blue
Filling Up Purple
Aborting Brown
Figure 2. Jet state and printer status bar colours
The printer is operating normally—there are no faults or warnings. The printer
status bar reflects the jet state.
10061
B
C
A