Lucent Technologies MERLIN LEGEND Release 6.1 Installation

MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
Initializing and Testing the System
Page 7-2
Initializing the System
Programming Guides
The following guides are available to assist you:
■ System Programming for quick-reference procedures (document
number 555-661-111)
■ System Programming and Maintenance (SPM) for detailed SPM
procedures (document number 555-661-140, in this binder)
Restoring from the Translation Memory Card
If you received the Release 6.1 Translation memory card, follow the
steps below to initialize the system:
!Perform a System Erase (frigid start).
See
Maintenance and Troubleshooting for detailed instructions.
Console Procedure:Menu:
0DLQWHQDQFH→6ORW→Dial or Type
→(QWHU→'HPDQG7HVW→6\VWHP(UDVH (Line 5, left button)
twice→
<HV
!Use the programming console and the translation memory card to
perform the Restore procedure.
See Appendix D of
Maintenance and Troubleshooting for instructions.
Restoring from the System
Programming Disk
If you received the Release 6.1 system programming disk, follow the
steps below to initialize the system:
!Perform a System Erase (frigid start).
See
Maintenance and Troubleshooting for detailed instructions.
Console Procedure:Menu:
0DLQWHQDQFH→6ORW→Dial or Type
→(QWHU→'HPDQG7HVW→6\VWHP(UDVH (Line 5, left button)
twice→
<HV

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English