Lucent Technologies MERLIN LEGEND Release 6.1 Installation

Unit Load Calculation Worksheet
Page B-1
MERLIN LEGEND Communications System Release 6.1
Installation
Issue 1
August 1998
MERLIN LEGEND Communications System Release 6.1
Installation
555-661-140
Issue 1
August 1998
B
Unit Load Calculation
Worksheet 2
If you determine that you need to recalculate the unit load for any carrier, use
the instructions on the following worksheet.
NOTE:
You should have a separate copy of the worksheet for each carrier.
See “Unit Loads” in Chapter 1 for information on recalculating unit loads.
The 391A3 power supply has a maximum rating of 75 unit loads. If your system
contains a 391A1 or 391A2 power supply module, and the unit loads for that
carrier will exceed 54, it is recommended that a 391A3 power supply be
installed in the system. Auxiliary Power Units cannot be used with the 391A3
power supply.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English