Preface LB 9507
IV
Display numbering For reasons of clarity, the displays within one measurement type
are numbered. In addition, every measurement type and special
function is given an identifying letter. This allows every display to
be easily identified and immediately assigned to a certain
procedure. The following identifying letters are used:
R = Raw data measurements (Chapter 5)
C = Cut-off measurements (Chapter 6)
L = Quantitative (LIA...) measurements (Chapter 7)
T = T-uptake/FTI measurements (Chapter 8)
D = Dual-Luciferase
TM
Reporter Gene Assay (Chapter 9)
K = Kinetic measurements (Chapter 10)
W = Washing function (Chapter 11.1)
S = Call up stored data (Chapter 11.4)
To Next Page
Loading...