LB 9507 Chapter 4: Structure and Operation of Software
4-7
4.2.4 <SYSTEM CONFIGURATION> Menu
Here you define the instrument configuration parameters:
<CV/CVD> Specify here whether the coefficient of variation is to be specified
in RLU (=C.V.) or in concentration units (CVD) on the thermal
printout.
<LANGUAGE> Set the language which you want to use in the integrated
software’s user interface (German/English/French).
<DATE> Enter the date.
<TIME> Enter the time.
<BEEP> Switching on and off the internal beep when the measurement is
finished
READY
MEASURE PROTOCOL -OTHERS-
<DATE> <TIME>
OPER. FUNCT. TURN ONCE -OTHERS-
<DATE> <TIME>
CONFIG. INSTR. PARAMS -OTHERS-
INSTRUMENT CONFIGURATION
CV/CVD LANGUAGE -OTHERS-
INSTRUMENT CONFIGURATION
DATE TIME -OTHERS-
INSTRUMENT CONFIGURATION
READY BEEP -OTHERS-
Fig. 4-6: Instrument configuration
To Next Page
Loading...