LB 9507 Chapter 4: Structure and Operation of Software
4-9
4.3 General Procedure
The following flow chart provides an overview of the essential
functions of Lumat, together with the way in which they are
interrelated. More detailed information is available in the chapters
listed.
1. Getting Started
The instrument parameters are defined and the instrument is
configured during the commissioning procedure.
2. Creating protocols for routine measurements
Up to 40 protocols can be stored in the <PROTOCOL> menu for
routine measurements. Four different types of protocols are
available.
3. Measurements
The <MEASURE> menu includes the following options:
● Measurements based on stored protocols
● Raw data measurement with direct entry of the parameters
● Kinetics measurement
4. Operator Functions
The <OPERATOR FUNCTIONS> menu provides the following
options:
● Data evaluation with manual data entry
● Evaluation of stored data
● Performing a system test
● Washing of the injector system
● Re-pumping of the reagents
To Next Page
Loading...