LB 9507 Chapter 11: Operator Functions
11-7
11.1.4 Removing reagents
After a measurement, the (valuable) reagents in the injector lines
can be pumped back into the supply bottles.
READY
MEASURE PROTOCOL -OTHERS-
READY
OPER. FUNCT. TURN ONCE -OTHERS-
OPER. FUNCT.:
REAGENT PERF.TEST -OTHERS-
OPER. FUNCT.:
PRIME REFRESH -OTHERS-
OPER. FUNCT.:
WASH MANUAL UNLOAD -OTHERS-
REMOVE REAGENTS
INJ1 INJ2 -OTHERS-
Figure 11-2: Selecting the <REMOVE REAGENT> option.
Note: When pumping reagents back, the reagents can become
contaminated which can result in an increased background
effect!
To Next Page
Loading...