LB 9507 Chapter 10: Kinetic Measurements
10-9
10.2.2 Editing/Deleting Protocols
K1
READY
MEASURE PROTOCOL -OTHERS-
Select the <PROTOCOL> menu by pressing the button located
directly below.
K2
PROTOCOL
MASTER CURVE CREATE CHANGE
Select <CHANGE>.
K2a
ENTER PROTOCOL NO. 6
PRINT LIST
You can print the list of stored protocols by selecting <PRINT
LIST>. Enter the required protocol number and press <enter>.
K2b
PROTOCOL # 6: Repeated
CHANGE OTHER PROT. PRINT PROT.
Select <PRINT PROT.> to print out the selected protocol.
<OTHER PROT.> takes you back to the previous display. You
can enter a new protocol number.
< CHANGE> takes you to the next display:
K2c
DELETE PROTOCOL NO. 6:
NO YES
To delete this protocol, select <YES>.
To edit the protocol, select <NO>. Then, the first entry of this
protocol is displayed, i.e. the user name in display K5:
To Next Page
Loading...