Chapter 2: Design of the Lumat LB 9507
2-10
2.5 Reagent Storage Area
A maximum of 2 reagent bottles are stored in an easily accessible
recess on the top of Lumat. The containers are filled with the
reagents required for the applications in hand, and linked to
connectors 1 and 2 next to the storage bottles on the instrument
by KEL/F screw joints (Fig. 2-9). Inside the instrument, these lines
lead to the injectors, and from there to the injector head with its
two injector tips.
To clean the injector lines, fill the tanks with washing solution and
select the program function <WASH>.
Injector line T-piece Sealing ring T-piece
Hexagon bolt Injector line
Fig. 2-9: Connection of the injector lines
To Next Page
Loading...