LUMAT LB 9507 - Default Chapter; Table of Contents

LB 9507 Contents
i
Contents
Trademarks iv
1. SYSTEM DESCRIPTION 1-1
1.1 Application 1-1
1.2 Structure and Operation of the Software 1-3
1.3 The Principle of Measurement 1-8
1.4 Sample Tubes 1-9
1.5 Data Management and Software update 1-10
1.6 Simple and Reliable Operation 1-11
1.7 Instrument and software versions 1-11
2. DESIGN OF LUMAT LB 9507 2-1
2.1 Keyboard 2-4
2.2 Display 2-5
2.3 Printer 2-5
2.4 Measurement Unit 2-6
2.5 Reagent Storage Area 2-10
2.6 Variable injectors 2-11
2.7 Reagent Supply 2-13
2.8 Memory Management 2-14
3. GETTING STARTED 3-1
3.1 Instrument Setup 3-1
3.2 Power Supply 3-1
3.3 Checking the Paper Supply 3-1
3.4 Switching on Lumat 3-2
3.5 System Configuration Parameters 3-3
3.5.1 Description of the System Configuration Parameters 3-4
3.5.2 System Configuration Table 3-6
3.6 Instrument Parameters 3-7
3.6.1 Setting/Verifying the Instrument Parameters 3-7
3.6.2 Changing the Instrument Parameters 3-9
3.7 Reagent Supply 3-11
3.8 Safety Precautions for Operation 3-13
4. STRUCTURE AND OPERATION OF SOFTWARE 4-1
4.1 Operation 4-1
4.2 The Six Functions of the Main Menu 4-2
4.2.1 <MEASURE> Menu 4-3
4.2.2 <PROTOCOL> Menu 4-4
4.2.3 <OPERATOR FUNCTIONS> Menu 4-6
4.2.4 <SYSTEM CONFIGURATION> Menu 4-7
4.2.5 <INSTRUMENT PARAMETER> Menu 4-8
4.2.6 <TURN ONCE> function 4-8
4.2.7 Service functions 4-8
4.3 General Procedure 4-9
5. RAW DATA MEASUREMENTS 5-1