Chapter 6: CUT-OFF-Measurements LB 9507
6-12
6.3 Editing/Deleting Protocols
C1
READY <DATE> <TIME>
MEASURE PROTOCOL -OTHERS -
Select the <PROTOCOL> menu by pressing the respective
button. Then follows:
C2
PROTOCOL
MASTER CURVE CREATE CHANGE
Select <CHANGE>.
C2a
ENTER PROTOCOL NO. 7
PRINT LIST
The list of stored protocols can be printed by selecting <PRINT
LIST>. Enter the required protocol number and press <enter>.
C2b
PROTOCOL # 7: CUT-10SEC-1INJ
CHANGE PROT. OTHER PROT. PRINT PROT.
Select <PRINT PROT.> to print out the selected protocol.
<OTHER PROT.> takes you back to the previous display and lets
you enter a new protocol number.
<CHANGE PROT.> takes you to the next display:
C2c
DELETE PROTOCOL # 7:
NO YES
To delete this protocol, select <YES>.
To edit the protocol, select <NO>. If you do this, the first entry of
this protocol is displayed, i.e. user name in display C5:
To Next Page
Loading...