Chapter 11: Operator Functions LB 9507
11-10
11.4 Retrieval of Stored Data
The last 30 measured or manually entered assays are stored in
the instrument for retrieval, recalculation, new printout or data
output to the computer interface. After running through the
standard values it is possible to edit the calibration curve, print the
curve, or enter a different smoothing factor.
It is also possible to evaluate the measured data using a modified
or another protocol than the one originally used in the
measurement. These two options should be used with particular
care.
For reasons of storage space, each stored assay can contain a
maximum of 250 measured values.
In each new measurement, the current oldest 30th assay is
deleted from the internal memory and replaced by the measured
values of the latest assay.
Each measurement stored in LB 9507 is accessed by a run
number which you can use to retrieve a certain measurement
again. The highest number is always the most recent
measurement; it is displayed first when you retrieve stored data. A
printout option is provided optionally to function is available; all
currently stored sequential numbers are printed along with their
data. The measurement selected by its sequential number refers
to this printout.
The following table provides an example of one of these printouts:
CURRENT LIST OF STORED RUNS
RUN PROTOCOL QTY. DATE TIME
NO. NO. NAME TUBE OF MEASUREMENT
5 3 T4 34 19 JAN 01 13:23
4 3 T4 56 18 JAN 01 7:34
3 3 TSH 42 17 JAN 01 15:02
2 4 CKMB 28 15 JAN 01 8:44
1 30 TUPTAKE 12 14 JAN 01 9:56
To Next Page
Loading...