Chapter 8: T-Uptake/FTI-Measurements LB 9507
8-12
8.3 Editing/Deleting protocols
T1
READY
MEASURE PROTOCOL -OTHERS-
Select the <PROTOCOL> menu by pressing the button located
directly below. The following display appears:
T2
PROTOCOL
MASTER CURVE CREATE CHANGE
Select <CHANGE>.
T2a
PROTOCOL NUMBER ? 9
PRINT LIST
You can print a list of the stored protocols by selecting <PRINT
LIST>.
Enter the desired protocol number and press <enter>.
T2b
PROTOCOL # 9: TUP/FTI
CHANGE OTHER PROT. PRINT PROT.
Select <PRINT PROT.> to print the selected protocol.
Select <OTHER PROT.> to return to the previous display and
enter a new protocol number.
Select <CHANGE> to reach this next display:
T2c
DELETE PROTOCOL # 9:
NO YES
To delete this protocol, select <YES>.
To edit the protocol, select <NO>.
The first entry in this protocol is then displayed (the operator name
entered in display T5):
To Next Page
Loading...