LB 9507 Chapter 7: Quantitative Measurements (LIA...)
7-13
L2c
DELETE PROTOCOL # 8:
NO YES
To delete this protocol, select <YES>.
To edit the protocol, select <NO>. If you do this the first entry of
the protocol is displayed, i.e. the user name in display L5:
L5
08: OPERATOR ID
This and all following entries can be overwritten. The following
input sequence is the same as the one described in the last
section starting with display L6. If you want to leave certain
parameters as they are, just press <enter>.
To Next Page
Loading...