LB 9507 Chapter 11: Operator Functions
11-13
G8
CHANGE CURVE
STANDARDS SMOOTHING LAST DISPLAY
This display lets you change the original ‘standard’ RLU values or
modify the automatically selected smoothing factor, which is
calculated when the instrument shows this display. After making
the changes, return to the display G7.
G9
FETCH STD ... REPL ... TUBE ...
As soon as all corrections and printouts of the current standard
curve are complete, the control and sample RLU values are
converted using the curve and the entire measurement is printed.
After completing the process, the instrument returns you to the
Ready display in the main menu.
To Next Page
Loading...