LB 9507 Chapter 12: Connection to External Computers
12-3
FTI values
Following the mean U-uptake concentration according to 12.2.6:
<FTI value> <RLU> (CR) (LF) Format: 8 digits
before and 3 after
decimal point, “<“ or
“>” if out of range,
and 13 spaces if
there are no FTI
values
to calculate.
End measurement
(SUB) At the end of a measurement series after each assay.
<Conc> Format
Right-justified, 8 digits before, 3 digits after decimal point. If a
concentration value is outside the calculated range of the
standard curve, the character “<“ (too low) or “>” (too high) is
output instead of the concentration value, followed by (CR) (LF).
<RLU> format
All RLU values are output with 12 digits, right-justified without
decimal point.
To Next Page
Loading...