3-26
[4] WIPER SWITCH
This switch (4) actuates the front window wiper.
Each time the switch is pressed, it changes ON→INT→STOP
(OFF).
• Monitor INT: Wiper operates intermittently
• Monitor ON: Wiper operates continuously
• Monitor OFF: Wiper stops
Each time wiper switch (4) is pressed, the mode is displyed in
the center of the monitor display, and after 2 seconds, the screen
returns to the standard screen.
[5] WINDOW WASHER SWITCH
If this switch (5) is kept continuously pressed; window washer fluid
is sprayed out on the front glass. When the switch is released, the
spray stops.
• If switch (5) is kept pressed when the wiper is stopped, the
window washer fluid will spray, and at the same time, the wiper
will be actuated continuously. When switch (5) is released, the
wiper will continue to operate for 2 cycles, and then stop.
• If the wiper is moving intermittently and switch (5) is kept pressed
continuously, window washer fluid will spray, and at the same
time, the wiper will be actuated continuously. When switch (5) is
released, the wiper will continue to operate for 2 cycles, and then
return to intermittent operation.
To Next Page
Loading...
