133
Mahr GmbH • Digimar 817 CLM
Description / Sequence Symbols / Pictures
– Activate ON/OFF key see point 8 „Import Language-Text-Data
(USB)“ to start transmission
Requires ca. 1 minute
If the language data has not been copied into the USB memory,
the following error will appear in the display
If under Point 6. Language „select any language“, the language
is missing, the following error will appear in the display
ON
OFF
Copy „FOREIGN.H“ on file system DOS
Then press any key to read the file to leave,
Press on CE!
Flash empty
To Next Page
Loading...
