Mahr Digimar 817 CLM - Zero Point Errors; Further Zero Point Functions

48
Mahr GmbH • Digimar 817 CLM
4.2.8 Zero point errors
– Before setting workpiece zero point 02 or 03, workpiece zero point
must be set first.
– Index 02 means that 02 must have a higher characteristic number
than 01.
– Index 03 means that 03 have a higher characteristic number
than 01 or 02
4.2.9 Further zero point functions
– Please refer to Chapter „Variable functions key 4.8“
Attention!
Within a measuring program only 1 zero point may be
set!
Description / Sequence Symbols / Pictures
0,00 ABS
AUTO
01