27
Mahr GmbH • Digimar 817 CLM
2.6 First measurement
Note:
In order to obtain highest accuracy the instrument requires at least a
warm-up period of 15 minutes.
2.6.1 Contacting a plane from above
– Position the probe
– Press key to start the measuring procedure
In the upper section of the display will appear the measured value
2.5 Auto-Off function
In the basic setting mode, the background lit display switches off after
1 minute, by pressing any key the background lit display will be
reactivated.
The height measuring instrument switches off after 5 minutes.
To change this basic setting, please refer to chapter 6.10
Note: No measuring results are lost when the height measuring
instrument switches off.
Description / Sequence Symbols / Pictures
To Next Page
Loading...
