Mahr Digimar 817 CLM - Setting Workpiece Zero Point 01

41
Mahr GmbH • Digimar 817 CLM
Description / Sequence Symbols / Pictures
4.2.2 Workpiece zero point 01
– Contact a plane
– Press „zero point“ key
– Press the function key „Workpiece zero point 01“
– By several characteristics the selection can be made using the
arrow keys
– Confirm by pressing the A key
– Workpiece zero point 01 is set
– The previous zero points will be deleted (02, 03, Preset)
A
01
0
01