Mahr Digimar 817 CLM - Basic Measuring Functions; Measuring Ledge Center and Width; Measuring Groove Center and Width

49
Mahr GmbH • Digimar 817 CLM
Measuring tasks Measuring procedure Results as shown
in the display
Function Quick-Mode Speed keys
key
4.3.1
Contact from above
(plane)
< 0.5 Sec.
4.3.2
Contact from below
(plane)
< 0.5 Sec.
4.3.3
Determine the center of
a ledge and the width
of the ledge
4.3.4
Determine the center of
a groove and the width
of the groove
z
Ø
1
2
z
Ø
1
2
z
z
QUICK
MODE
4.3 Basic measuring functions
1
2