25
Mahr GmbH • Digimar 817 CLM
2.1 Switching ON
– Switch the mains power supply switch to ON = (1)
Press the ON/OFF key; this will start the boot up.
Note: At the first commissioning, by a RESET or when updating
the software, the following questions (the basic settings) will
appear:
2.2 Basic settings
These can be selected by using the arrow keys, confirm by pressing
the Enter key.
Enter the time and date via the keypad
Select: Language
Select: Unit of
measurement
Select: Resolution
Enter the date and time
2. Commissioning / First steps
Description / Sequence Symbols / Pictures
ON
OFF
ON
OFF
To Next Page
Loading...
