Mahr Digimar 817 CLM User Manual

87
Mahr GmbH • Digimar 817 CLM
1. <-_______
2. Standstill-time
3. Contacting speed
4. Resolution
5. mm/inch
6. Language
7. Date and time
8. LCD settings
9. Beep ON/OFF
10. Auto – off time (min)
11. Quick-Mode
12. Perpendicularity
13. Data and printer
14. Advanced settings
08:48:32
04/04/2007
Mon
Tue
Wed
Thu
Fri
Sat
Son
1. <-_______
2. Standstill-time
3. Contacting speed
4. Resolution
5. mm/inch
6. Language
7. Date and time
8. LCD settings
9. Beep ON/OFF
10. Auto – off time (min)
11. Quick-Mode
12. Perpendicularity
13. Data and printer
14. Advanced settings
1. <--------
2. LCD Contrast
3. LCD Backlight
Adjust LCD contrast
with cursor keys
1. LCD bright
2. LCD power saving
1. <-_______
2. Standstill-time
3. Contacting speed
4. Resolution
5. mm/inch
6. Language
7. Date and time
8. LCD settings
9. Beep ON/OFF
10. Auto – off time (min)
11. Quick-Mode
12. Perpendicularity
13. Data and printer
14. Advanced settings
1. Activate Beep
2. Deactivate Beep
6.10 Auto-OFF
The height measuring instrument automatically
switches itself off if it is not used for a certain time. This
period can be between 1 and 99 minutes. All measured
values will reappear once the instrument is switched
back on, thus no measured values are lost.
The background lit display switches itself off, if no key
is pressed within the given period of time, e.g. 10
minutes. The background lit display can be switched on
again by pressing any key. Once this is done, you can
resume work at exactly the same step where it was
interrupted.
Standard Auto-OFF setting = 5 min
Standard Background lit display setting = 1 min
6.9 Acoustic signal
Active or deactivate the signal tone (beep).
6.8 LCD settings
– Use the cursor keys to change the contrast setting
(brighter or darker) of the LCD display.
– The background lit display can be set to be bright or
energy saving (slightly darker).
6.7 Date and time
The current date and time are displayed; use the
cursor to change the date.
1. <-_______
2. Standstill-time
3. Contacting speed
4. Resolution
5. mm/inch
6. Language
7. Date and time
8. LCD settings
9. Beep ON/OFF
10. Auto – off time (min)
11. Quick-Mode
12. Perpendicularity
13. Data and printer
14. Advanced settings
Auto-off time 10 (min)
Backlight auto-off 10 (min)

Mahr Digimar 817 CLM Specifications

General

Brand	Mahr
Model	Digimar 817 CLM
Category	Measuring Instruments
Language	English