18
Mahr GmbH • Digimar 817 CLM
1.3.2.5 Variable function keys
Depending upon the measuring task, the bitmap symbols above the variable function keys change accordingly. By
pressing the individual key, the function will be activated or you will enter a subdirectory / lower level. The different
meanings are described in the operating instructions.
1.3.2.6 Input pad
Each key is assigned a multiple character function, by
repeatedly pressing a key the next assigned character
will appear, for example:
2 -> A -> B -> C -> 2 -> A . . .
1.3.2.7 Quick-Mode
Activate / deactivate
1.3.2.8 Arrow keys
Arrow keys left / right - Cursor jumps 5 times left / right
Arrow keys up / down - Cursor jumps once up / down
– See chapter 4.8
To Next Page
Loading...
