Manitowoc 2250 User Manual

Reference Only
Manitowoc Published 06-24-16, Control # 241-01 2-7
2250 OPERATOR MANUAL SAFETY INFORMATION
2
OPERATOR MANUAL/CAPACITY CHART
STORAGE
Manitowoc Cranes provides the following manuals and other
important literature with your crane and attachments.
• Operator Manual (Serial Numbered)
Contains safety information, crane specifications,
assembly/erection procedures, operating instructions,
and lubrication and maintenance checks.
• Parts Manual (Serial Numbered)
Contains illustrations and part numbers of replaceable
parts.
• Capacity Chart Manual (Serial Numbered)
Contains lifting capacities and related information (wire
rope specifications, drum and lagging information.)
• Maintenance Checks and Lubrication Guide
Contains lists of maintenance checks and lubrication
services and their prescribed intervals.
• Rated Capacity Indicator/ Limiter Operation
Contains rated capacity indicator and/or rated capacity
limiter operation, limits, and calibration procedures.
• Service Manual (Serial Numbered)
Contains theory of operation, maintenance procedures,
crane and wire rope inspection procedures,
troubleshooting information, and shop procedures.
The manuals that must be retained in the operator’s cab
(Operator Manual, Capacity Chart Manual, Maintenance
Checks and Lubrication Guide, and RCL Operation) are
supplied in an Operator Information binder. A separate
binder is provided for the crane and each applicable
attachment.
The operator manuals, and capacity charts are stamped with
the serial number of the crane or attachment. The serial
number on the manuals must match the serial number of the
crane and attachment in use.
NOTE: Using any other crane model manuals or capacity
charts is prohibited.
• The crane model and serial number is located on the
crane identification plate on the crane cab.
• The model and serial number of the attachment (other
than standard boom) is located on the crane
identification plate on the attachment.
If the serial numbers of your manuals and capacity charts do
not match the serial numbers of the crane or attachment,
contact your Manitowoc Cranes dealer for the proper
manuals or capacity charts.
NOTE: Do not operate the crane or attachment if the
proper capacity chart is not in the cab.
Storing Manuals
See Figure 2-2 for the following information.
Store the Operator Manual for the crane and each applicable
attachment in the holder in the operator’s cab.
Chain the manual to the link provided.
Keep all other manuals provided with the crane in the crane
owner/user’s office so they are readily available when
needed.
Holder Behind
Operator’s Seat
Operator Information
Manuals
FIGURE 2-2
P431c
Chain

Manitowoc 2250 Specifications

General

Brand	Manitowoc
Model	2250
Category	Construction Equipment
Language	English