EasyManuals Logo

Manitowoc 2250 User Manual

Manitowoc 2250
312 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Reference Only
SAFETY INFORMATION 2250 OPERATOR MANUAL
2-26
Published 06-24-16, Control # 241-01
• For wire rope suspended platforms, the crane is
equipped with a hook latch that can be closed and
locked, eliminating the throat opening.
• The platform is properly attached and secure.
• Personnel platforms must not be used in winds
exceeding 9 m/s (20 mph)
at the hoisted platform
height or in electric storms, snow, ice, sleet, or other
adverse
weather conditions that could affect the
safety of personnel
.
• Hoisting personnel within 6 m (20 ft) of a power line that
is up to 350 kV or within 15 m (50 ft) of a power line that
is over 350 kV is prohibitted, except for work covered in
OSHA 29CFR1926 subpart V.
For operation outside the United States, the requirements of
the applicable national, state, and local regulations and
safety codes must be met. This may include, in addition to
the above:
• Automatic brakes such that when the equipment
operating controls are released, the motions are brought
to rest.
• A holding device (such as a load hold check valve) must
be provided in the hydraulic or pneumatic systems to
prevent uncontrolled movement of the hoisting
equipment in the case of a system failure.
Manitowoc Cranes offers upgrade packages for friction
controlled models to install anti-two-block, dead man control,
and automatic hoist system control requirements to satisfy
other codes and standards.
Manitowoc Cranes recommends that cranes be properly
maintained, regularly inspected, and repaired as necessary.
All safety signs must be in place and legible. We also urge
Manitowoc cranes crane owners to upgrade their cranes with
rated capacity indicator/limiter systems for all lifting
operations.
If you have any questions about this subject or other product
safety matters relating to the operation and use of a
Manitowoc crane, please contact your Manitowoc Cranes
dealer or the Product Safety and Reliability Department at
the following address:
Manitowoc Cranes
2401 So. 30th St.
Manitowoc, WI 54220
Phone: 920-684-6621

Table of Contents

Other manuals for Manitowoc 2250

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc 2250 and is the answer not in the manual?

Manitowoc 2250 Specifications

General IconGeneral
BrandManitowoc
Model2250
CategoryConstruction Equipment
LanguageEnglish

Related product manuals