Manitowoc Grove TMS9000-2 Series - Page 117

Grove Published 02-21-2019, Control # 611-05 3-53
TMS9000-2 OPERATOR MANUAL OPERATING CONTROLS AND INDICATORS
3
Manual telescoping menu
The manual telescoping menu allows the operator to
manually telescope the boom by manually pinning and
unpinning the section and cylinder pins and then extending
or retracting the hydraulic cylinder.
ODM Working Range Limiter (WRL)
Introduction
The Working Range Limiter (WRL) is a feature of the crane
control system that allows for the definition of obstacles or
limits for crane operation. This definition can then be used by
the crane control system to assist the operator with
identifying the motion of crane with respect to these
obstacles and limits.
In addition, if the WRL is configured to do so, the crane
functions can be affected to slow and stop with respect to
limitations; this behavior is referred to as lockout.
FIGURE 3-49
8882-7a
1
2
3
4
5
6
7
8
Item Description Refer to
1
Telescopic section locking
status
2
Telescopic section symbol
unlock
page 3-104
3 Current telescopic section page 3-103
4
Telescoping cylinder
locking status
5
Telescoping cylinder
symbol unlock
page 3-104
6
Telescoping cylinder length
display
7 Main boom length display
8
Telescopic section symbol
lock or telescoping cylinder