Operation
130
Telescoping Lower Links
(If Equipped)
B06835
Pull the latch handle up and pull the end of the
lower link out.
Connect the extended lower links to the
implement.
The lower links will retract and lock in place when
the tractor is moved rearward.
IMPORTANT: Make sure that the lower links
are fully retracted and locked in place before
operating the tractor.
Left Hand Stabilizer (Option A)
(If Equipped)
The stabilizer locking device is operated by an
adjustable chain and spring. The chain length
can be altered by connecting different links of the
chain to the hook on the rear left fender.
Rigid Operation
DP96H270
With the three point linkage fully lowered, adjust
the chain by putting a different link on the fender
hook so the chain becomes loose and there is no
tension in the spring. The stabilizer will be locked
for rigid operation.
Sway Operation
DP96H271
With the three point linkage fully lowered, adjust
the chain by putting a different link on the fender
hook so the chain is tight and the spring is under
tension. This will hold the top latch of the
stabilizer up. The stabilizer will be free to float for
sway operation.
When the three point linkage is raised the chain
will loosen, the top flap will drop and lock the
stabilizer to prevent sway during transportation.
To Next Page
