Operating Controls
34
Seat Belt (If Equipped)
STEP 1
MI03A015
Adjust the seat to your requirements.
Keep your back straight in the seat. Pull the seat
belt completely across your body and push the
metal eye (1) into the latch assembly (2) until it
locks.
Adjust the position of the s.0eat belt as low on your
body as possible.
To release the seat belt, push the red button (3) on
the latch assembly.
IMPORTANT: From time to time, carefully
inspect the seat belt and replace belt if worn
or damaged.
Passenger Seat (If Equipped)
The passenger seat allows a colleague to ride in
safety and comfort.
IMPORTANT:
1. Children are NOT permitted to use the
passenger seat.
2. The left hand door MUST be closed at all times
whenever the passenger seat is occupied and
the tractor is in motion.
3. See page 11 for additional safety information.
STEP 1
MH04F102
Raise the seat base.
STEP 2
MH04F103
Insert the seat base support between the seat base
stops as shown above.
IMPORTANT: Before using the passenger seat make
sure the seat base and support are fully secure.
STEP 3
Store the seat in the reverse sequence.
WARNING: Securely fasten your seat belt.
Your tractor is equipped with a ROPS cab
or frame for your protection. The seat belt
can help ensure your safety if it is used and
maintained. Never wear the belt in a
twisted condition or pinched between the
seat structural members.
1
2
3
To Next Page
Loading...
